No thanks, I don't want to customize this item
Enter customization text in the field below.
Adding item(s) to basket...
Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Specification:D=22 mmC=10 mmB=22 mm
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter.Specification:D=22 mmC=1/2 inchC=12.7 mmB=22 mmR=4 mmR2=...
To create profiles in the face or edge of drawer fronts and cabinet doors.Specification:D=19 mmD2=6.5 mmC=11 mmR=4 mmOL=53 mmShank Diameter=1/4 inch
Produces an elegant edge mould or a shallow panel effect when routing on its full width.Specification:D=20 mmC=15 mmR=6 mmOL=53 mmShank Diameter=1/2 inch
With bearing guided ogees change profile by using a larger bearing and vary the depth.Specification:D=1 inchD=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmB2=12.7 mmR=4 mmOL=63 mmShank Diameter=...
With bearing guided ogees change profile by using a larger bearing and vary the depth.Specification:D=1 inchD=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmB2=12.7 mmR=4 mmOL=54 mmShank Diameter=...
With bearing guided ogees change profile by using a larger bearing and vary the depth.Specification:D=34.9 mmC=20 mmB=9.5 mm B2=12.7 mmR=6.3 mmOL=67.5 mmShank Diameter=1/2 inch
With bearing guided ogees change profile by using a larger bearing and vary the depth.Specification:D=34.9 mmC=20 mmB=9.5 mmB2=12.7 mmR=6.3 mmOL=58 mmShank Diameter=1/4 inch
Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk.Specification:D=51 mmC=24 mm
Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk.Specification:D=29 mmC=1/2 inc...
Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk.Specification:D=1 5/8 inchesD=41.3 mm
Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk.Specification:D=57 mmC=25.5 mmB=9.5 ...
Supplied with two bearings. The larger bearing removes the bottom quirk.Specification:D=63 mmC=20 mmB=9.5 mmB2=12.7 mmR=9.5 mmR2=9.5 mmOL=79 mmShank Diameter=1/2 inchFor station...
By raising the cutter the top quirk is removed.Specification:D=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmR=4 mmOL=63.5 mmShank Diameter=1/2 inch
By raising the cutter the top quirk is removed.Specification:D=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmR=4 mmOL=65.5 mmShank Diameter=1/4 inch
By raising the cutter the top quirk is removed.Specification:D=35 mmC=25/32 inchC=20 mmB=9.5 mmR=6.3 mmOL=69.5 mmShank Diameter=1/4 inch
Versatile cutter using all or part of the cutter.Specification:D=28.5 mmC=5/8 inchC=15.9 mmB=9.5 mmR=4 mmOL=65.5 mmShank Diameter=1/4 inch
Versatile cutter using all or part of the cutter.Specification:D=28.5 mmC=5/8 inchC=15.9 mmB=9.5 mmR=4 mmOL=65.5 mmShank Diameter=8 mm
Versatile cutter using all or part of the cutter.Specification:D=38 mmC=24 mmB=9.5 mmR=6.3 mmOL=72 mmShank Diameter=1/4 inch
By raising the cutter the top quirk is removed. Alternative bearing Refs. B95A & B127A.Specification:D=35 mmC=13.5 mmB=12.7 mmR=4 mmOL=65 mmShank Diameter=1/4 inch
Supplied with extra 1/2 inch bearing for removing the lower quirk.Specification:D=30.5 mmC=1/2 inchC=12.7 mmB=9.5 mmB2=12.7 mmR=5 mmR2=4 mmOL=64.5 mmShank Diameter=1/4 inch
Supplied with extra 1/2 inch bearing for removing the lower quirk.Specification:D=35 mmC=11/16 inchC=17.5 mmB=9.5 mmB2=12.7 mmR=6.3 mmR2=4.8 mmOL=69 mmShank Diameter=1/4 inch
Alternative bearing B127A removes the lower quirk.Specification:C=1/2 inchC=12.7 mmB=9.5 mmR=4 mmR2=4 mmOL=64.5 mmShank Diameter=1/4 inch
Alternative bearing B127A removes the lower quirk.Specification:C=11/16 inchC=17.5 mmB=9.5 mmR=6.3 mmR2=4.8 mmOL=69 mmShank Diameter=1/4 inchD=34.9 mm
Wide combination moulds for edging table tops and shelves.Specification:D=58 mmC=23 mmB=12.7 mmR=7.5 mmR2=6.1 mmOL=72.5 mmShank Diameter=1/2 inch
Wide combination moulds for edging table tops and shelves.For stationary machines - 16000 RPM recommended speed.Specification:D=63 mmC=20 mmB=12.7 mmR=10.5 mmR2=6.5 mmOL=82.5 mmShank Diamete...