Slotting & Grooving

Trend 34/9TC Slotter 2.5mm Kerf M12mm Bore

Trend 34/9TC Slotter 2.5mm Kerf M12mm Bore

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=2.5 mmNo. of Teeth=4

From £76.69
More Details
Trend 342X1/2TC Biscuit Jointer Set

Trend 342X1/2TC Biscuit Jointer Set

For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...

From £72.15
More Details
Trend 342X1/4TC Biscuit Jointer Set

Trend 342X1/4TC Biscuit Jointer Set

For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...

From £72.15
More Details
Trend 342X8MMTC Biscuit Jointer Set

Trend 342X8MMTC Biscuit Jointer Set

For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...

From £72.15
More Details
Trend 35/01X1/4TC Keyhole Cutter

Trend 35/01X1/4TC Keyhole Cutter

A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads.Not suitable for grooving applications.Specification:D=12.7 mmD2=8 mmS=4.6 mmC=4.9 mmOL=38.1 mm

From £43.83
More Details
Trend 35/0X1/4TC Keyhole Slotter

Trend 35/0X1/4TC Keyhole Slotter

A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads.Not suitable for grooving applications.Specification:D=9.5 mmD2=4.5 mmS=5.5 mmC=4.5 mmOL=40 mmSh...

From £39.89
More Details
Trend 35/10X3/8TC T Slotter

Trend 35/10X3/8TC T Slotter

A range of heavy duty 'T' slot cutters for clamping and hanging applications.MEC mechanical feed only.Specification:D=28 mmD2=11.2 mmC=4 mmR=2 mmOL=52 mmShank Diameter=3/8 inch

From £58.49
More Details
Trend 35/1X1/4TC T Slotter

Trend 35/1X1/4TC T Slotter

Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage.Specification:D=12 mmD2=4 mmS=10.0 mmOL=53 mmShank Diamete...

From £58.49
More Details
Trend 35/20X1/2TC Ball Groover Cutter

Trend 35/20X1/2TC Ball Groover Cutter

Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers.Specification:D=12.7 mmD2=6.5 mmOL=58 mmR=6.35 mm

From £55.19
More Details
Trend 35/3X3/8TC T Slotter

Trend 35/3X3/8TC T Slotter

A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.Specification:D=28 mmD2=9.5 mmC=8 mmOL=60 mmShank Diameter=3/8 inch

From £58.49
More Details
Trend 35/4X1/2TC T Slotter

Trend 35/4X1/2TC T Slotter

A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.Specification:D=35 mmD2=12.7 mmC=9.5 mmOL=65 mmShank Diameter=1/2 inch

From £70.20
More Details
Trend 35/5X1/2TC Slat Wall Cutter

Trend 35/5X1/2TC Slat Wall Cutter

A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.MEC mechanical feed only.Specification:D=30 mmD2=10.5 mmC=7 mmR=3 mmA=119 degreesOL=60 mm

From £70.20
More Details
Trend 36/10X1/4TC 13mm Rebater

Trend 36/10X1/4TC 13mm Rebater

Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specification:D=13 mmD2=19 mmC= 10 mmC2= 6 mmOL=50.8 mmS...

From £67.48
More Details
Trend 36/19X1/2TC 19mm Rebater

Trend 36/19X1/2TC 19mm Rebater

Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip.Specification:D=9.5 mmD2=19 mmC=13 mm...

From £61.36
More Details
Trend 36/19X1/4TC 19mm Rebater

Trend 36/19X1/4TC 19mm Rebater

Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip.Specification:D=9.5 mmD2=19 mmC=13 mm...

From £61.36
More Details
Trend 39/6TC Slotter 2mm Kerf 12mm Bore

Trend 39/6TC Slotter 2mm Kerf 12mm Bore

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Requires heavy duty arbor accessory.Recommended used in a fixed head router at 12 000 r...

From £81.93
More Details
Trend 865X1/4TC Finger Jointer

Trend 865X1/4TC Finger Jointer

A bearing guided reversible finger jointer to increase the gluing area for edge to edge joints.Specification:D=24.6 mmC=18.5 mmOL=58 mmB=12.7 mmShank Diameter=1/4 inch

From £72.88
More Details
Trend 866X1/2TC Finger Jointer

Trend 866X1/2TC Finger Jointer

Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold resulting in an extremely strong joint. The Finger Jointer fits into any portable or stat...

From £117.04
More Details
Trend B127 Bearing 1/2inch Diameter 1/4inch Bore

Trend B127 Bearing 1/2inch Diameter 1/4inch Bore

Trend Router Cutter Bearing - for 1/4in shank mountingHigh quality ball bearing for free running against an edge to prevent heat build up.1/4in inside diameter for direct fit to router shanks and arbors.1/2in outside diameter for ma...

From £8.62
More Details
Trend B14 Bearing 14mm Diameter 1/4inch Bore

Trend B14 Bearing 14mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £13.15
More Details
Trend B15 Bearing 15mm Diameter 1/4inch Bore

Trend B15 Bearing 15mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £13.15
More Details
Trend B16 Bearing 5/8inch Diameter 1/4inch Bore

Trend B16 Bearing 5/8inch Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £5.13
More Details
Trend B17 Bearing 17mm Diameter 1/4inch Bore

Trend B17 Bearing 17mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £13.15
More Details
Trend B18 Bearing 18mm Diameter 1/4inch Bore

Trend B18 Bearing 18mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £13.43
More Details
Trend B182 Bearing 18.2mm Diameter 1/4inch Bore

Trend B182 Bearing 18.2mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £10.82
More Details
Trend B19 Bearing 3/4inch Diameter 1/4inch Bore

Trend B19 Bearing 3/4inch Diameter 1/4inch Bore

Trend Router Cutter Bearing - for 1/4in shank mountingHigh quality ball bearing for free running against an edge to prevent heat build up.1/4in inside diameter for direct fit to router shanks and arbors.3/4in outside diameter for ma...

From £5.71
More Details
Trend B20 Bearing 20mm Diameter 1/4inch Bore

Trend B20 Bearing 20mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B21 Bearing 21mm Diameter 1/4inch Bore

Trend B21 Bearing 21mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B210 Bearing 21mm Diameter 12mm Bore

Trend B210 Bearing 21mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=21 mmID=12 mmThickness=5 mmBearing Code=R801Z

From £10.08
More Details
Trend B22 Bearing 22mm Diameter 1/4inch Bore

Trend B22 Bearing 22mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B23 Bearing 23mm Diameter 1/4inch Bore

Trend B23 Bearing 23mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B24 Bearing 24mm Diameter 1/4inch Bore

Trend B24 Bearing 24mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.27
More Details
Trend B25 Bearing 25mm Diameter 1/4inch Bore

Trend B25 Bearing 25mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B250 Bearing 25mm Diameter 12mm Bore

Trend B250 Bearing 25mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=25 mmID=12 mmThickness=5 mm

From £16.51
More Details
Trend B254 Bearing 25.4mm Diameter 1/4inch Bore

Trend B254 Bearing 25.4mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B26 Bearing 26mm Dia X 12mm Bore

Trend B26 Bearing 26mm Dia X 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=26 mmID=12 mmThickness=5.9 mm

From £10.08
More Details
Trend B260 Bearing 26mm Diameter 1/4inch Bore

Trend B260 Bearing 26mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £11.58
More Details
Trend B27 Bearing 27mm Diameter 12mm Bore

Trend B27 Bearing 27mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=27 mmID=12 mmThickness=5.9 mm

From £16.51
More Details
Trend B270 Bearing 27mm Diameter 1/4inch Bore

Trend B270 Bearing 27mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £11.58
More Details
Trend B28 Bearing 28mm Diameter 12mm Bore

Trend B28 Bearing 28mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=28 mmID=12 mmThickness=8 mmBearing code=6001-2...

From £13.15
More Details
x
Powered by kartris