Unfortunately we are no longer able to guarantee delivery of orders before Christmas. You are welcome to contact us prior to placing an order to check stock and delivery times. We would like to wish you all a Merry Christmas and a Happy New Year!
Slotting & Grooving
These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut.Specification:D=50 mmBore=M12Kerf=2.5 mmNo. of Teeth=4
From
£76.69
More Details
For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...
From
£72.15
More Details
For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...
From
£72.15
More Details
For biscuit jointing of timber man-made fibre and particle board with the router. The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.A slightly longer cut than the length of the bisc...
From
£72.15
More Details
A keyhole recess for picture hanging flush to the wall. Ref. 35/01 - No.10 & No.12 screw heads.Not suitable for grooving applications.Specification:D=12.7 mmD2=8 mmS=4.6 mmC=4.9 mmOL=38.1 mm
From
£43.83
More Details
A keyhole recess for picture hanging flush to the wall. Ref. 35/0 - No.8 & No.10 screw heads.Not suitable for grooving applications.Specification:D=9.5 mmD2=4.5 mmS=5.5 mmC=4.5 mmOL=40 mmSh...
From
£39.89
More Details
A range of heavy duty 'T' slot cutters for clamping and hanging applications.MEC mechanical feed only.Specification:D=28 mmD2=11.2 mmC=4 mmR=2 mmOL=52 mmShank Diameter=3/8 inch
From
£58.49
More Details
Slots for concealing electric cables etc. A 6mm slot must be cut first to allow for the cutter neck. Care must be taken to avoid breakage.Specification:D=12 mmD2=4 mmS=10.0 mmOL=53 mmShank Diamete...
From
£58.49
More Details
Ideal for hiding pipes and cables. Part of curve can be used for producing decorative edges. An initial slot is required before using the ball groovers.Specification:D=12.7 mmD2=6.5 mmOL=58 mmR=6.35 mm
From
£55.19
More Details
A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.Specification:D=28 mmD2=9.5 mmC=8 mmOL=60 mmShank Diameter=3/8 inch
From
£58.49
More Details
A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.Specification:D=35 mmD2=12.7 mmC=9.5 mmOL=65 mmShank Diameter=1/2 inch
From
£70.20
More Details
A range of heavy duty 'T' slot cutters for clamping and hanging applications.Relief cut required.MEC mechanical feed only.Specification:D=30 mmD2=10.5 mmC=7 mmR=3 mmA=119 degreesOL=60 mm
From
£70.20
More Details
Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specification:D=13 mmD2=19 mmC= 10 mmC2= 6 mmOL=50.8 mmS...
From
£67.48
More Details
Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip.Specification:D=9.5 mmD2=19 mmC=13 mm...
From
£61.36
More Details
Recessing cutter for producing double rebates.For producing recesses with a lower rebate.Designed to accept library/bookcase strip. Specifically designed for Tonk Strip.Specification:D=9.5 mmD2=19 mmC=13 mm...
From
£61.36
More Details
These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers with or without a bearing.Requires heavy duty arbor accessory.Recommended used in a fixed head router at 12 000 r...
From
£81.93
More Details
A bearing guided reversible finger jointer to increase the gluing area for edge to edge joints.Specification:D=24.6 mmC=18.5 mmOL=58 mmB=12.7 mmShank Diameter=1/4 inch
From
£72.88
More Details
Finger Jointer combines an assembley of five TCT slotting cutters with an abutting-edge cutter to produce a profile that extends the glue line threefold resulting in an extremely strong joint. The Finger Jointer fits into any portable or stat...
From
£117.04
More Details
Trend Router Cutter Bearing - for 1/4in shank mountingHigh quality ball bearing for free running against an edge to prevent heat build up.1/4in inside diameter for direct fit to router shanks and arbors.1/2in outside diameter for ma...
From
£8.62
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£13.15
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£13.15
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£5.13
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£13.15
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£13.43
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£10.82
More Details
Trend Router Cutter Bearing - for 1/4in shank mountingHigh quality ball bearing for free running against an edge to prevent heat build up.1/4in inside diameter for direct fit to router shanks and arbors.3/4in outside diameter for ma...
From
£5.71
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=21 mmID=12 mmThickness=5 mmBearing Code=R801Z
From
£10.08
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.27
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=25 mmID=12 mmThickness=5 mm
From
£16.51
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£12.21
More Details
Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=26 mmID=12 mmThickness=5.9 mm
From
£10.08
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£11.58
More Details
Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=27 mmID=12 mmThickness=5.9 mm
From
£16.51
More Details
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.
From
£11.58
More Details
Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=28 mmID=12 mmThickness=8 mmBearing code=6001-2...
From
£13.15
More Details