Slotting & Grooving

Products (115)
1 2 3 »
Trend B280 Bearing 28mm Diameter 1/4inch Bore

Trend B280 Bearing 28mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £11.58
More Details
Trend B29 Bearing 29mm Diameter 12mm Bore

Trend B29 Bearing 29mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=29 mmID=12 mmThickness=5 mm

From £16.51
More Details
Trend B290 Bearing 29mm Diameter 1/4inch Bore

Trend B290 Bearing 29mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £11.58
More Details
Trend B30 Bearing 30mm Diameter 12mm Bore

Trend B30 Bearing 30mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=30 mmID=12 mmThickness=5.9 mm

From £13.15
More Details
Trend B300 Bearing 30mm Diameter 1/4inch Bore

Trend B300 Bearing 30mm Diameter 1/4inch Bore

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up.

From £12.21
More Details
Trend B31 Bearing 31mm Diameter 12mm Bore

Trend B31 Bearing 31mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=31 mmID=12 mmThickness=5.9 mm

From £16.51
More Details
Trend B32 Bearing 32mm Diameter 12mm Bore

Trend B32 Bearing 32mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=32 mmID=12 mmThickness=10 mmBearing Code=6201-...

From £12.21
More Details
Trend B33 Bearing 33mm Diameter 12mm Bore

Trend B33 Bearing 33mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=33 mmID=12 mmThickness=8 mm

From £16.51
More Details
Trend B34 Bearing 34mm Diameter 12mm Bore

Trend B34 Bearing 34mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=34 mmID=12 mmThickness=8 mm

From £12.21
More Details
Trend B35 Bearing 35mm Diameter 12mm Bore

Trend B35 Bearing 35mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=35 mmID=12 mmThickness=8 mm

From £12.21
More Details
Trend B36 Bearing 36mm Diameter 12mm Bore

Trend B36 Bearing 36mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=36 mmID=12 mmThickness=9 mm

From £12.21
More Details
Trend B37 Bearing 37mm Diameter 12mm Bore

Trend B37 Bearing 37mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=37 mmID=12 mmThickness=12 mmBearing Code=6301-...

From £7.31
More Details
Trend B38 Bearing 38mm Diameter 12mm Bore

Trend B38 Bearing 38mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=38 mmID=12 mmThickness=8 mm

From £12.21
More Details
Trend B39 Bearing 39mm Diameter 12mm Bore

Trend B39 Bearing 39mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=39 mmID=12 mmThickness=9 mm

From £15.36
More Details
Trend B40 Bearing 40mm Diameter 12mm Bore

Trend B40 Bearing 40mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=40 mmID=12 mmThickness=10 mm

From £12.21
More Details
Trend B41 Bearing 41mm Diameter 12mm Bore

Trend B41 Bearing 41mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=41 mmID=12 mmThickness=9 mm

From £17.70
More Details
Trend B42 Bearing 42mm Diameter 12mm Bore

Trend B42 Bearing 42mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=42 mmID=12 mmThickness=10 mm

From £13.89
More Details
Trend B43 Bearing 43mm Diameter 12mm Bore

Trend B43 Bearing 43mm Diameter 12mm Bore

Bearing for slotting systems.Ball bearings should be wiped clean not dipped in solvent.Prevent resin build-up by cleaning with wire brush.Specification:OD=43 mmID=12 mmThickness=10 mm

From £13.89
More Details
Trend QUADX1/2TC Quad Groover Set

Trend QUADX1/2TC Quad Groover Set

This versatile 1/2 inch shank groover set offers grooving widths of 3.2mm 4.0mm 4.8mm and 6.3mm. It is infiniteley variable from 6.6mm to 18mm in 0.1mm increments. A jointing facility using the bearing is also possible. Set comprises of fo...

From £105.33
More Details
Trend SHIM/12 Shim Set 12mm Bore X 18mm OD

Trend SHIM/12 Shim Set 12mm Bore X 18mm OD

Set of twelve shims for fine adjustment of slotters and groovers on arbors.Each set comprises two shims of each thickness.Specification:ID=12 mmOD=18 mm

From £9.23
More Details
Trend SHIM/63 Shim Set 6.3mm Bore X 11.5mm Odia

Trend SHIM/63 Shim Set 6.3mm Bore X 11.5mm Odia

Set of twelve shims for fine adjustment of slotters and groovers on arbors.Each set comprises two shims of each thickness.Specification:ID=6.3 mmOD=11.5 mm

From £9.23
More Details
Trend SHIM/PACK/2 Shim 8mm ID X 0.1mm 10 Pack

Trend SHIM/PACK/2 Shim 8mm ID X 0.1mm 10 Pack

Spare shim packs for adjusting profile scribe sets.Supplied in packs of 10 either 0.05mm or 0.1mm thick.Specification:OD=16 mmID=8 mmThickness=0.1 mm

From £5.85
More Details
Trend SL/A Slotter 1.5mm Kerf 1/4 Bore

Trend SL/A Slotter 1.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=1.5 mm...

From £30.67
More Details
Trend SL/AA Slotter 1.5mm Kerf 1/4 Bore

Trend SL/AA Slotter 1.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=1.5 mm...

From £29.22
More Details
Trend SL/B Slotter 2.0mm Kerf 1/4 Bore

Trend SL/B Slotter 2.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=2.0 mm...

From £30.67
More Details
Trend SL/C Slotter 2.5mm Kerf 1/4 Bore

Trend SL/C Slotter 2.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=2.5 mm...

From £30.67
More Details
Trend SL/CC Slotter 2.5mm Kerf 1/4 Bore

Trend SL/CC Slotter 2.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=2.5 mm...

From £29.22
More Details
Trend SL/D Slotter 3.0mm Kerf 1/4 Bore

Trend SL/D Slotter 3.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=3.0 mm...

From £30.67
More Details
Trend SL/DD Slotter 3.0mm Kerf 1/4 Bore

Trend SL/DD Slotter 3.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=3.0 mm...

From £29.22
More Details
Trend SL/E Slotter 2.0mm Kerf 1/4 Bore

Trend SL/E Slotter 2.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=2.0 mm...

From £30.67
More Details
Trend SL/F Slotter 2.5mm Kerf 1/4 Bore

Trend SL/F Slotter 2.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=50 mmKerf=2.5 mm...

From £34.61
More Details
Trend SL/G Slotter 4.0mm Kerf 1/4 Bore

Trend SL/G Slotter 4.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=4.0 mm...

From £34.61
More Details
Trend SL/GG Slotter 4.0mm Kerf 1/4 Bore

Trend SL/GG Slotter 4.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=4.0 mm...

From £33.00
More Details
Trend SL/H Slotter 5.5mm Kerf 1/4 Bore

Trend SL/H Slotter 5.5mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=36 mmKerf=5.5 mm...

From £37.68
More Details
Trend SL/K Slotter 5.0mm Kerf 1/4 Bore

Trend SL/K Slotter 5.0mm Kerf 1/4 Bore

All slotters are precision made in TCT grade for long life when cutting the most abrasive materials.Requires an arbor Ref. 33/60 and suitable diameter bearing to govern depth of cut.Specification:D=40 mmKerf=5.0 mm...

From £37.68
More Details
1 2 3 »
x
Powered by kartris